http://SHAKTIMOTOR.COM
SHAKTIENGINEERSMUMBAI 57a950fd9ec66820fc9f7f8e False 81 29
OK
background image not found
Updates
2018-09-17T06:07:51
update image not found
ADOPTA GEAR BOXES are Helical Inline Gear Boxes, designed to mount flange type I.E.C. Standard Electric Motors. Inline Helical Gear Boxes shown here are suitable for coupling to I.E.C. Standard motors. Foot Mounting. For the capacity refer to STANDARD GEARED MOTORS.
2018-09-17T06:04:13
update image not found
We are newly develop by Speed Enhancer.
2018-09-12T05:59:23
update image not found
Shree Shakti Bump and Jolt Machine The Machine consists of rectangular table rigidly connected by four support arms to two spindles at a horizontal distance of 600 mm from the centre of the table. The table can be raised and allowed to fall freely by a cam which is connected to a motor, through a distance of 25mm. The cam rotates at a rate of 60 rev/min. You can vary from 60 strokes to 240 strokes per minute by means of a controller. The jolts are provided by a heavy duty vibratory motor, fixed to the top table. The amplitude and the frequency of jolts can be changed from 10 to 50 jolts per second by the controller. A stroke counter fitted with micro- switch is provided, which stops the machine after the predetermined Bumps. The Article to be tested is clamped on to the top table by means of adjustable slings.
2018-09-12T05:55:26
update image not found
AS Bin activator manufacturer in Mumbai, WE OFFER BIN ACTIVATORS THAT ELIMINATES THESE PROBLEMS TO ASSURE YOU POSITIVE CONTINUOUS FLOW WITHOUT ANY OPERATIONAL HEADACHES.
2018-09-11T07:39:22
update image not found
SHREE SHAKTI is the Industrial Gear Box manufacturer in Mumbai that offer products available in single, Double, Triple and Quadruple reductions. We are also the Industrial Gear Box manufacturer in Mumbai of Combination gear units such as Heliworm, Hollow Shaft etc. They are available in foot, foot cum flange, Agitator type of mountings. The opposite page illustrates some of these designs. The motor body, end covers, Industrial Gear Box manufacturer in Mumbai from close grained cast iron. All the gears and pinions are made out of top grade special alloy steels, which are heat treated and lapped for long life and silent running. As the Industrial Gear Box manufacturer in Mumbai, we make sure the ball/roller bearings used are of good quality and are suitable for heavy duty application. Industrial Gear Box manufacturer in Mumbai the input and output shafts are of high quality steel. For low speeds, the motor shaft has integral pinion and the shaft is made out of special alloy steel. As the best Industrial gearbox manufacturers in Mumbai our motors are designed for trouble free, economical performance. It seals off the input side of the gear box. Normally it is totally enclosed, fan cooled, continuously rated, Class B insulation operating on 400/440 volts, 3 phase, 50 cycles A.C. supply as per I.S :325. Class F or H insulation, IP 55 enclosures etc. can be offered.
false